88 YJ-CJ Wheel Wells Finished etc

Wheel Wells Finished

Passenger Side

The passenger side with the flare installed using factory hardware:

Driver Side

The driver's side got the finishing touches...welds ground flush.

Flare mounting holes drilled

Primed:

Flare installed:

Shifter Boot Frame

I was missing the metal frame that goes over the transfer case shifter boot, so I made one out of 1/8" aluminum.  This was another hot afternoon project in the somewhat cooler garage - at least I wasn't out in the sun!  

Drilling the corners of the internal cut:

Corners drilled out:

The inside was cut with a jig saw

Test fit:

The outer perimeter was cut on the Milwaukee-Swag bandsaw.  And the holes were drilled.  

Test Fit:

I gave it a gentle curve in the vise to fit the curve in the plate:

Done for now: